Warehouse labour is one of the largest operating costs in many logistics operations. At the same time, employees directly influence picking speed, order accuracy, dispatch performance, and the overall reliability of warehouse processes.
However, improving labour productivity does not simply mean asking employees to work faster or reducing headcount. Sustainable productivity comes from matching workforce capacity to operational demand, eliminating unnecessary activities, balancing workloads, and managing performance with reliable data.
The objective is simple: get more value from every labour hour while maintaining safety, quality, and service levels.
Here are seven practical ways to optimise warehouse labour productivity.
1. Measure Labour Productivity Consistently
You cannot improve labour productivity without understanding how it is currently performing.
Start by defining a small set of measurable indicators that reflect the actual work being performed. The most useful measure depends on the warehouse process:
- Picking productivity – order lines picked per labour hour
- Packing productivity – orders packed per labour hour
- Receiving productivity – units or pallets received per labour hour
- Put-away productivity – pallets or units stored per labour hour
- Shipping productivity – orders or pallets dispatched per labour hour
A basic labour productivity formula is:
Labour Productivity = Total Output / Direct Labour Hours
For example:
A warehouse team picks 1,200 order lines using 60 direct labour hours.
1,200 / 60 = 20 order lines per labour hour
If the team increases productivity to 22 lines per labour hour with the same working hours, output increases by 10%.
The important point is to compare equivalent activities, shifts, product types, and operating conditions. Comparing different processes using one universal productivity target can lead to misleading conclusions.
Practical tip: Establish a baseline for each major warehouse activity before setting improvement targets.
2. Match Workforce Capacity to Workload
One of the most common sources of poor labour productivity is a mismatch between available employees and actual workload.
Some shifts may have more employees than necessary, while others struggle to complete orders on time. This often results in unnecessary overtime, idle capacity, rushed work, or delayed dispatches.
To improve workforce planning:
- Analyse historical order volumes by day and hour
- Identify workload peaks and seasonal patterns
- Plan staffing according to expected workload
- Consider order complexity, not only order volume
- Adjust shift patterns when demand changes
- Maintain a flexible resource pool for peak periods
For example, if order volumes consistently increase on Monday mornings, staffing should reflect that pattern instead of distributing employees equally across all shifts.
Workforce planning should also account for the time required for receiving, replenishment, inventory checks, cleaning, meetings, and other essential activities.
Practical tip: Create a simple workload forecast using historical order volumes and expected labour requirements. Review the forecast regularly against actual results.
3. Balance Employee Workloads
Even when the total number of employees is sufficient, productivity can suffer if work is not distributed effectively.
For example, one picking zone may have a high workload while another has available capacity. Employees in one process may be overloaded while others are waiting for work.
This creates bottlenecks and prevents the warehouse from using its full labour capacity.
Consider these actions:
- Monitor workload by zone, process, and shift
- Identify recurring bottlenecks
- Cross-train employees to support multiple activities
- Reallocate employees when workload changes
- Review the balance between picking, replenishment, packing, and dispatch
- Avoid assigning work based only on fixed routines when operational demand varies
Cross-training is particularly valuable. Employees who can perform more than one warehouse activity provide greater flexibility when volumes fluctuate or unexpected absences occur.
Practical tip: Review workload distribution during the shift, not only at the end of the day. Early adjustments can prevent delays from accumulating.
4. Reduce Non-Value-Adding Labour Activities
Not every paid labour hour creates value for the customer.
Employees may spend considerable time walking unnecessary distances, searching for products, waiting for equipment, correcting errors, or handling the same goods multiple times.
These activities consume capacity without increasing completed output.
Common sources of wasted labour include:
- Excessive travel between picking locations
- Searching for incorrectly stored or unidentified inventory
- Waiting for replenishment or material handling equipment
- Repeated handling of products
- Correcting picking and packing errors
- Unclear work instructions and process interruptions
A practical way to identify these losses is to observe employees performing their daily tasks and map the actual process.
For example, if warehouse pickers spend too much time travelling, improving slotting, picking routes, or warehouse layout may increase output without adding employees.
Practical tip: Start with the activities that consume the most time. Small improvements repeated across hundreds of daily tasks can create significant capacity gains.
5. Standardize Work Methods and Train Employees
Different employees often perform the same task in different ways. Some methods may be efficient, while others create unnecessary movements, delays, or errors.
Standardized work helps establish a consistent and repeatable way of performing key warehouse activities.
This should include:
- Clear task instructions
- Defined process steps
- Standard operating procedures
- Proper equipment usage
- Training for new and existing employees
- Consistent quality and safety requirements
Standardization does not mean ignoring individual experience. Experienced employees can help identify better methods and contribute to improving work standards.
Training is equally important. Employees who understand warehouse systems, product locations, scanning procedures, and handling requirements are more likely to work efficiently and make fewer mistakes.
Practical tip: Document the best-known method for each key activity, train employees, and review the standard whenever the process changes.
6. Manage Performance During the Shift
Measuring productivity at the end of the day is useful, but it does not always help managers solve problems while they are happening.
Daily performance management allows supervisors to identify deviations early and take corrective action.
A simple shift management routine can include:
- Review the expected workload and staffing plan before the shift.
- Communicate daily priorities and performance expectations.
- Monitor actual output against the plan during the shift.
- Identify delays, bottlenecks, and resource shortages.
- Reallocate employees when necessary.
- Review results and improvement actions at the end of the shift.
Visual performance boards or digital dashboards can make this process easier.
Managers should be able to see what was planned, what has been completed, how many labour hours have been used, and whether the operation is on track.
The purpose is not to monitor employees unnecessarily. It is to identify process problems early and give teams the support they need.
Practical tip: Use short, structured performance meetings focused on facts, operational issues, and actions rather than simply reporting numbers.
7. Use KPIs to Improve Labour Utilisation
A good labour productivity management system should combine output, labour hours, quality, and service performance.
Focusing on only one KPI can create unintended behavior. For example, increasing picking speed without monitoring accuracy may lead to more errors and rework.
Consider tracking these indicators:
| KPI | What It Measures |
| Units or lines per labour hour | Output relative to labour input |
| Labour cost per order | Labour cost required to process an order |
| Overtime hours (%) | Dependence on additional working hours |
| Labour utilisation (%) | Share of available labour time spent on defined productive activities |
| Picking accuracy (%) | Quality of picking operations |
| Orders completed per shift | Overall shift output |
| On-time dispatch (%) | Ability to meet dispatch deadlines |
Definitions must be consistent. For example, labour utilisation should clearly specify which activities count as productive time and which time categories are excluded.
Review KPIs by process, shift, and team where appropriate. This helps identify where performance differs and where improvement efforts will have the greatest impact.
Practical tip: Start with five to seven relevant KPIs. Make sure every indicator has a clear definition, a responsible owner, and a regular review routine.
Conclusion: Improve Productivity by Improving the System
Warehouse labour productivity is not determined by employee effort alone. It is influenced by workload planning, process design, warehouse layout, equipment availability, training, and management routines.
The most effective improvements usually come from addressing several factors together:
- Plan labour capacity according to actual demand
- Balance workloads across processes and shifts
- Reduce unnecessary movement, waiting, and rework
- Standardize work methods
- Monitor performance during the shift
- Use reliable KPIs to guide improvement
A warehouse that understands how its labour hours are used can make better operational decisions, improve service levels, and control costs without relying only on additional employees or overtime.
TOP KPI helps warehouse and logistics operations identify productivity losses, improve processes, and build performance management systems based on reliable operational data.
Explore our AUDIT, IMPLEMENTATION, and POWER BI solutions to turn warehouse performance data into measurable operational improvements.
